Quality Policy

Where Quality Meets Abode

The product is only as good as the quality of raw materials and the processing that it goes through. Needless to define, the passion to bring in sustainable architecture and also setup an unrivalled infrastructure has made us prompt in ascertaining quality being maintained at each step.

From stage A to stage Z of the entire process, we incorporate the finest resources in our products. More precisely, pure rubber wood or eucalyptus for chipboards, use of only the choicest imported décor papers from Europe, highest grade of resins and German additives and technologically superior quality checks have ensured that our final products not only conform to but exceed the requirements of the most stringent global quality standards.

 

Stain Resistance

Test: The pre-laminated board is exposed for 16 hours to stains and chemicals like coffee, tea, soya sauce and acetone

Result: The stains can be wiped out with a damp cloth without any change in surface colour

Burning Resistance

Test: A lit cigarette is placed on the pre-laminated board surface with a 10mm burning edge

Result: A Slight brown colour is observed which can be wiped off with ethanol or a damp cloth

Porosity Test

Test: The pre-laminated board surface is scratched with pencil and cleaned with eraser

Result: There is no graphite stain observed with naked eyes

Abrasion Resistance

Test: Taber Abraser is applied at 100rpm on the pre-laminated board surface

Result: Surface weight is reduced by 70mg with no significant change on the surface

Cracking Resistance

Test: The pre-laminated board is placed in an oven at 70°C for 24 hours

Result: There is insignificant change in the board structure and the gloss or colour levels

Steam Resistance

Test: The pre-laminated board surface is exposed to steam for 1 hour

Result: There is insignificant change in the gloss or clour levels